@article { author = {Borhani, Faezeh and Zahed, Fatemeh and Noorpoor, Alireza}, title = {Modeling and evaluating the contribution of NOX and CO pollutants emitted in the insulation Bituminous units (Isogam) exhaust flue gas on the around area (Case study: Delijan City)}, journal = {New Science and Technology}, volume = {1}, number = {2}, pages = {91-100}, year = {2019}, publisher = {}, issn = {2783-1094}, eissn = {2783-1094}, doi = {}, abstract = {. For this purpose, the chimney outlet parameters of one unit are measured by gas analyzer KIMO, KIGAZ300.Then, using climate variables like temperature, humidity, wind speed or direction with the daily Delijan 2015 weather station and emission source characteristics including the chimney height, speed and exhaust gas temperature, the rate of emission, etc., its distribution is modeled by AERMOD software. The model is designed to estimate the discharge rate from adjacent sources (less than 50 km). In order to determine and evaluate the unit's share of total emissions in the sample-studied materials in summer the 4-polluting source of all the chimneys were measured. Results of air pollution dispersion modeling shows that the highest concentration of Carbon monoxide and nitrogen oxide are 0.19348 and 0.14003μg/m3 on hourly average and occurred in the eastern part of the North. Evaluating the results of modeling and measuring carbon monoxide emissions in several points of the city, CO and NOX percent (as environmental pollutants) are determined 0.26 and 0.14 respectively in urban air.}, keywords = {Isogam Bituminous unit”,“air pollutants emissions”,“Dispersion”,“AERMOD model”}, title_fa = {مدل سازی و ارزیابی سهم انتشار آلاینده های NOX و CO خروجی از دودکش یک کارخانه تولید ایزوگام روی منطقه اطراف ( مطالعه موردی: دلیجان)}, abstract_fa = {به منظور تعیین سهم کارخانه ایزوگام مورد مطالعه از کل منابع آلاینده، ابتدا نمونه برداری در فصل پاییز از 4 منبع نقطه ای که خروجی دودکش های یک کارخانه پخت ایزوگام می باشند برای دو آلاینده منوکسید کربن و اکسیدهای ازت بعمل آمد پس از اعمال مقادیر اندازه گیری شده خروجی دودکش ها در مدل AERMOD و مدلسازی انتشار آلاینده های خروجی دودکش ها در منطقه اطراف، میزان نشر حاصل از مدلسازی در چهار نقطه معینی از محوطه اطراف کارخانه (چهارگوشه کارخانه) مشخص گردید. مقایسه نتایج حاصل از مدل سازی پراکنش آلودگی با مقادیر اندازه گیری شده در همان نقاط نشان داد غلظت آلاینده ها ناشی از غلظت آلاینده منوکسید کربن به مقدار 19348/0 میکروگرم بر مترمکعب و ناشی از آلاینده اکسید ازت 14003/0 میکروگرم بر مترمکعب، در متوسط زمانی یک ساعته می باشد. با مقایسه نتایج حاصل از مدل سازی انتشار و اندازه گیری میدانی میزان آلاینده منوکسید کربن و اکسیدهای ازت در هوای محیطی چهار نقطه مشخص می شود سهم آلاینده منوکسید کربن و اکسیدهای ازت ناشی از یک واحد تولید ایزوگام در هوای شهر به ترتیب برابر 26/0 و 14/0 درصد می باشد.}, keywords_fa = {"کارخانه ایزوگام","پراکنش","انتشار آلاینده","مدل AERMOD "}, url = {https://www.jsat.ir/article_107477.html}, eprint = {https://www.jsat.ir/article_107477_43d561394cc5f126976151c77bf04552.pdf} }