@article { author = {vafaei, hamidreza}, title = {Exergy evaluation and exergoeconomic optimization in the Tehran international tower, Iran}, journal = {New Science and Technology}, volume = {2}, number = {1}, pages = {122-131}, year = {2020}, publisher = {}, issn = {2783-1094}, eissn = {2783-1094}, doi = {}, abstract = {In this research, exergy assessment and exergoeconomic optimization for Tehran international tower, which is the tallest building in Iran, were carried out. This high-rise tower with 220 square meter structure located in 35000 square meter site and has a single plant room which includes three double effect steam chillers with 850 tons of refrigeration capacity. For the generation of the required amount of steam to use in chillers and steam heat exchangers as well as two steam boilers with 3.78 kg/s capacity, a new scenario was considered. Boilers output steam pressure and temperatures are 9.8 bar and 152 Celsius degrees, respectively. For assessment, the cycle, firstly thermodynamic diagram of the cycle has been drawn and for all the points thermodynamic properties have been defined. After regarding energy equations and rules, energy evaluation considered for all equipment. In the next step, exergy assessment started and all effective factors on it were calculated. By determination major effective factors, exergoeconomy evaluation has been done using EES software. In conclusion, the results show that the best fitted thermodynamic properties for chiller input and boiler input-output points can cause improvement the first and second thermodynamic law and reduction in exergy streams costs.}, keywords = {Absorption refrigeration system,Steam Boiler,Tehran Residential tower,Exergy, Exergoeconomic, Optimization}, title_fa = {ارزیابی اگزرژی و بهینه سازی اگزرژی-اقتصادی برج بین المللی تهران}, abstract_fa = {در این تحقیق، ارزیابی و بهینه سازی اگزرژی و اگزرژی-اقتصادی برای برج تهران، انجام شده است. این برج مرتفع با مساحت 220000 متر مربع در 35000 متر مربع زمین در شهر تهران قرار دارد و دارای یک موتورخانه مرکزی است. این موتورخانه شامل سه عدد چیلر جذبی دو اثره با 850 تن تبرید ظرفیت و همچنین دو عدد دیگ بخار با توان تامین 78/3 کیلوگرم بخار در ثانیه برای تولید مقدار کافی بخار جهت استفاده در چیلرها و مبدل های حرارتی بخار . فشار و دمای بخار خروجی دیگهای بخار به ترتیب 9.8 بار و 152 درجه سانتیگراد می باشد.به منظور ارزیابی ابتدا طرحواره چرخه ترمودینامیکی ترسیم شده و برای تمام نقاط، خواص ترمودینامیکی مشخص شده است. سپس با توجه به معادلات و قوانین انرژی، ارزیابی انرژی برای کلیه تجهیزات در نظر گرفته شده. در مرحله بعد، ارزیابی اگزرژی آغاز گردیده و همه عوامل مؤثر بر آن محاسبه شده اند. با تعیین فاکتورهای مهم و مؤثر، ارزیابی اگزرژی-اقتصادی با استفاده از نرم افزار EES انجام شده است. نتایج نشان می دهد که با انجام تنظیمات لازم در خواص ترمودینامیکی سیال و بخار درنقاط ورودی-خروجی چیلرها و دیگها می توان باعث کاهش هزینه های جریان اگزرژی گردید.}, keywords_fa = {سیستم تبرید جذبی,دیگ بخار,برج بین المللی تهران,اگزرژی؛اگرزژی-اقتصادی,بهینه سازی}, url = {https://www.jsat.ir/article_107537.html}, eprint = {https://www.jsat.ir/article_107537_e11f6184afb33fe43a4343f9f1fa2977.pdf} } @article { author = {dalir, fatemeh}, title = {Carbon Footprint modelling in F Class Triple Pressure Combined Cycle with Focus on Pressure of Drums}, journal = {New Science and Technology}, volume = {2}, number = {1}, pages = {132-138}, year = {2020}, publisher = {}, issn = {2783-1094}, eissn = {2783-1094}, doi = {}, abstract = {Carbon Footprint modelling in F Class Triple Pressure Combined Cycle with Focus on Pressure of Drums The consequences of climate change has been growing every day on human beings life. For combating and limiting the the earth temperature rise to 2 degree celcius, scientists follow two paths, up to date low carbon technology and incrising the resilience.Iran is among the top ten countries which emits greenhouse gases and according to INDC in UNFCCC, the emission can be reduced to 12% by 2030 inline wit BAU scenario. Up grading E class gas turbine to F class and using triple pressure heat recovery steam generator can produce more power and less carbon footprint. In combined cycles, parameters like pressure of drums and pinch are of high importance that can effect power and carbon footprint. Keywords “Triple pressure combined cycle power plant”, “Drum pressure”, “Carbon footprint”, “thermodynamical analysis” e e e e e}, keywords = {“Triple pressure combined cycle power plant”,“Drum pressure”,“Carbon footprint”,“thermodynamical analysis”}, title_fa = {مدل سازی ردپای کربن در نیروگاه سیکل ترکیبی کلاس F با بویلر سه فشاره با تمرکز بر روی تأثیر فشار درام ها}, abstract_fa = {اثرات تغییرات اقلیم بر روی ساکنان کره زمین روزبه‌روز بیشتر می شود. برای مبارزه با گرمایش جهانی 2 روش که دارای هم‌زمانی می باشند مدنظر دانشمندان می‌باشد. اولین آن استفاده از تکنولوژی‌های به‌روز در کاهش انتشار در متوقف کردن یا حداقل کند کردن روند افزایش درجه حرارت زمین می ‌باشد و روش دوم افزایش تاب‌آوری ساکنان زمین در این خصوص می‌باشد. ایران ازنظر انتشار دی‌اکسید کربن در جمع ده کشور اول جهان می باشد و مطابق کنوانسیون بین‌المللی برنامه جامع جهت کاهش انتشار تا 40 % بر اساس سناریوی BAU که می‌تواند تا سال 2030 به 12% افزایش پیدا کند را ارائه نموده است. با توجه به اینکه در ایران نیز مانند بیشتر کشورهای جهان بیشتر سهم برق تولیدی بر عهده نیروگاه‌های در بین نیروگاه‌های حرارتی سیکل های ترکیبی که دارای راندمان بالاتری می‌باشند موردتوجه قرار دارند. ارتقا توربین ها از کلاس E به کلاس F و استفاده از بلویلرهای سه فشاره با مصرف سوخت تقریباً مشابه توان بیشتری قابل استحصال است. توان بیشتر با مصرف سوخت ثابت موجب کاهش ردپای کربن خواهد شد. در سیکل های ترکیبی، عملکرد و پارامترهای بویلر مانند فشار و دبی جرمی درام ها، پینچ به‌عنوان مهم‌ترین عضو سیکل ترکیبی‌ها دارای اهمیت می‌باشد. پارامترهای نظیر فشار درام های بویلر و همچنین پینچ می تواند ازجمله تأثیرگذارترین پارامترها در تعیین توان خروجی توربین بخار و ردپای کربن برق تولیدی مؤثر است.}, keywords_fa = {" نیروگاه سیکل ترکیبی سه فشاره "," فشار درام "," ردپای کربن"," تحلیل ترمودینامیکی "}, url = {https://www.jsat.ir/article_107616.html}, eprint = {https://www.jsat.ir/article_107616_03f647f4473a9ac4ab54637167292648.pdf} } @article { author = {anani, yavar and Gomar, zahra and dalir, fatemeh}, title = {Paris Agreement and Emission Mitigation in Iran Power Industry}, journal = {New Science and Technology}, volume = {2}, number = {1}, pages = {139-144}, year = {2020}, publisher = {}, issn = {2783-1094}, eissn = {2783-1094}, doi = {}, abstract = {Paris Agreement and Emission Mitigation in Iran Power Industry The consequences of climate change has been growing every day on human beings life. For combating and limiting the the earth temperature rise to 2 degree celcius, scientists follow two paths, up to date low carbon technology and incrising the resilience.Iran is among the top ten countries which emits greenhouse gases and according to INDC in UNFCCC, the emission can be reduced to 4 to 12% by 2030 inline wit BAU scenario. In BAU, the Iran emission is estimated to around 1782 million ton. Hence it required to mitigate the emission 71.28 million ton of CO2eq in conditional situation of INDC. In this paper the potentials of power industry for reducing emission is investigated. Keywords “Paris Agreement”, “emission mitigation”, “Power Industry” e e e e e e e e e e e e e e e e e e e e}, keywords = {“Paris Agreement”,“emission mitigation”,“Power Industry”}, title_fa = {موافقت نامه پاریس و روند کاهش انتشار در صنعت برق ایران}, abstract_fa = {بخش برق یکی از اساسی ترین و مهم ترین ارکان دستیابی به توسعه پایدار به شمار می رود و تولید برق مطمئن، با کیفیت و پاک سیاست اصلی صنعت برق ایران بوده و اقدامات متعددی در این زمینه در قالب سیاست گذاری، برنامه و پروژه در هر سه زیر حوزه تولید، انتقال و توزیع برق توسط بخش دولتی و خصوصی می بایست به انجام برسد. بر اساس آنچه که در سند مشارکت ملی ذکر شده است ایران در موافقت نامه پاریس متعهد به کاهش 4 و 12 درصدی میزان انتشار گازهاى گلخانه اى به صورت غیرمشروط و مشروط در پایان سال 2030 و بر اساس سناریوی ادامه روند موجود (BAU: Business As Ususal) می باشد. میزان انتشــار گازهاى هاى گلخانه اى در سال 2030 در ایران در حدود 782/1 میلیارد تن معادل CO2eq تخمین زده می شود. در نتیجه میزان کاهش انتشار حدود 28/71 میلیون تن CO2eq به صورت غیر مشروط و حدود 84/213 میلیون تن CO2eq به صورت مشروط برآورد می گردد. در این مقاله پتانسیل صنعت برق در گاهش انتشار بررسی شده است.}, keywords_fa = {" موافقت نامه پاریس "," کاهش انتشار "," صنعت برق"}, url = {https://www.jsat.ir/article_107618.html}, eprint = {https://www.jsat.ir/article_107618_1b465ce2601769bd26b7aa4b3b4bd63b.pdf} } @article { author = {dalir, fatemeh}, title = {Thermodynamic Analusis and Optimization of F Class Triple Pressure Combined Cycle}, journal = {New Science and Technology}, volume = {2}, number = {1}, pages = {145-151}, year = {2020}, publisher = {}, issn = {2783-1094}, eissn = {2783-1094}, doi = {}, abstract = {Thermodynamic Analusis and Optimization of F Class Triple Pressure Combined Cycle Combined cycle powerplant is one of the most effective power generation means. While the efficiemcy is higher than others, its flexibility and instant start up are also the key factors. In this paper thermodynamical analysis and optimization of of F class triple pressure power plant is investigated. For achivieng the maximum power, the pressure of drums must be designed to LP=3.74 bar و IP=25.96 bar وHP= 158.9 bar. In this case maxium steam turbine is 145.362 MW and for maximum of efficiency 58.34 the pressure mus be adjusted to LP=3.74 bar و IP=26.84 bar وHP= 142.6 bar. Keywords “Triple pressure combined cycle power plant”, “Drum pressure”, “Carbon footprint”, “thermodynamical analysis” - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - -}, keywords = {“Triple pressure combined cycle power plant”,“Drum pressure”,“Carbon footprint”,“thermodynamical analysis”}, title_fa = {تحلیل و بهینه سازی ترمودینامیکی سیکل ترکیبی کلاس F سه فشاره}, abstract_fa = {نیروگاه سیکل ترکیبی موثرترین نوع نیروگاه در بین تمامی نیروگاه هاست زیرا علاوه بر بازده بالا مزایای دیگری همچون انعطاف پذیری و راه اندازی سریع نیز برخوردار است. در این مقاله تحلیل و بهینه سازی ترمودینامیکی سیکل ترکیبی با استفاده از توربین بخار سه فشاره و توربین گازی کلاس F با استفاده از روش ترمودینامیکیارائه شده است. پارامتری که در این مقاله برای بهینه سازی مورد نظر قرار گرفته است فشار درام های LP، IPو HP می باشد. با استفاده از حل ارائه شده، تغییرات دبی جرمی بخار، توان تولیدی، راندمان سیکل، توان تولیدی هر بخش توربین بخار و دمای دود خروجی از دودکش بویلر بازیاب حرارتی بر حسب فشار درام های مختلف ارائه و فشار بهینه برای اینکه حداکثر توان و یا حداکثر راندمان حاصل گردد، مشخص شده است. بالاترین میزان توان تولیدی توربین بخار در فشار های LP=3.74 bar و IP=25.96 bar وHP= 158.9 bar اتفاق می افتد در این حالت میزان توان تولیدی توربین بخار 362/145 مگاوات می باشد. در صورتی که راندمان حداکثر مطلوب باشد، فشار درام ها به صورت LP=3.74 bar و IP=26.84 bar وHP= 142.6 bar بهترین ترکیب می باشد و راندمان حداکثر سیکل ترکیبی 34/58 خواهد بود.}, keywords_fa = {" نیروگاه سیکل ترکیبی سه فشاره "," فشار درام "," بهینه سازی "," تحلیل ترمودینامیکی "}, url = {https://www.jsat.ir/article_107619.html}, eprint = {https://www.jsat.ir/article_107619_66a590f27279c8606b5438b84efbb6dd.pdf} } @article { author = {Shakouri, Mahdi and Shekari, Nasim}, title = {Developing Energy Performance for a Petroleum Refining Industry Using Regression Analysis and Linear Multivariable Modeling}, journal = {New Science and Technology}, volume = {2}, number = {1}, pages = {152-156}, year = {2020}, publisher = {}, issn = {2783-1094}, eissn = {2783-1094}, doi = {}, abstract = {In this research, the energy performance of a petroleum refining unit has been reviewed and analyzed within the process of energy management system implementation. According to the results of analysis done by the research team, an appropriate energy performance indicator with an accurate demonstration of the real data for the process unit has been provided. The studied case is a petroleum refining unit in Iran and the research team has developed energy performance indicator using regression analysis and multivariable modeling for the crude distillation unit of the plant. In order to develop the applied and reliable model for the studied case, a research team has focused on all energy carriers and utility flows as well as all potentially relevant parameters. Then, in order to identify the unified performance indicator, all the energy carriers and utility flows have been unified in an equivalent energy content to the primary energy. The developed model is considered as a baseline and it can be considered as a basis for evaluation of the energy performance.}, keywords = {“Energy performance indicator”,“Energy baseline”,“Multivariable modeling”,“Regression analysis”,“Crude distillation unit”}, title_fa = {توسعه شاخص عملکرد انرژی یک واحد پالایش نفت با استفاده از تحلیل رگراسیون و مدل سازی چند متغیره}, abstract_fa = {در این مقاله، عملکرد انرژی یک واحد پالایش نفت در راستای پیاده سازی سیستم مدیریت انرژی مورد بررسی و تحلیل قرار گرفته است. با توجه به تحلیل های انجام شده توسط تیم تحقیق، شاخص عملکرد انرژی مناسب که نمایش دقیق تری از ارتباط بین داده های واقعی را برای آن واحد نشان دهد، ارائه شده است. واحد صنعتی مورد مطالعه یک شرکت پالایش نفت در کشور ایران است و تیم تحقیق با استفاده از تحلیل رگراسیون و مدل سازی خطی چند متغیره، شاخص عملکرد انرژی فرآیند تقطیر آن واحد را توسعه داده است. برای رسیدن به این مدل که در عین کاربردی بودن برای تیم انرژی سازمان، از قابلیت اطمینان بالایی هم برخوردار است، تمامی حامل های انرژی و جریان های یوتیلیتی و متغیرهای مستقل و موثر بر آن شناسایی شده و داده های مربوط به آن ها گردآوری و تحلیل شدند. سپس با معادل سازی و تجمیع همه حامل های انرژی و جریان های یوتیلیتی براساس انرژی اولیه، مدل کلی برای مصرف انرژی واحد تقطیر به دست آمده است. این مدل توسعه یافته از داده های پیش از اقدامات بهبود، خط مبنای انرژی نامیده می شود که نقطه شروع برای مقایسه عملکرد انرژی است.}, keywords_fa = {"شاخص عملکرد انرژی","خط مبنای انرژی","مدل‌سازی چند متغیره","تحلیل رگراسیون","واحد تقطیر پالایش نفت"}, url = {https://www.jsat.ir/article_107953.html}, eprint = {https://www.jsat.ir/article_107953_846b38880b7abb56075eeafd8c46e020.pdf} } @article { author = {Mostafavi Sani, Mostafa}, title = {Modeling of energy hub to supply water, heating and electrical demands of a cement factory}, journal = {New Science and Technology}, volume = {2}, number = {1}, pages = {157-173}, year = {2020}, publisher = {}, issn = {2783-1094}, eissn = {2783-1094}, doi = {}, abstract = {This paper uses the energy hub concept to meet the electricity, heat and water demand of a cement plant in south of Iran. Given the cement plant’s high potential for waste heat recovery, two scenarios were considered using the hub energy concept based on energy, exergy, economic and environmental analyzes. Scenario 1: meeting the demands of the hub and purchasing/selling energy carriers including electricity, heating, freshwater as well as its production using gas turbine, steam turbine, boiler, Multi-Effect Desalination (MED) and Reverse Osmosis (RO) system. Scenario 2: meeting hub demands based on scenario 1 and recovering waste heat from the cement plant. By comparing the two energy supplying systems of the current case study and optimal energy hub, results showed that the Total Annual Cost (TAC) level decreased by about 37,000 $/year and exergy efficiency increased by 36%. Results indicate that upon optimization, the average of TAC when waste heat is recovered, is 27% of the condition when waste heat is ignored.}, keywords = {Energy hub,Total Annual Cost (TAC),Genetic Algorithm}, title_fa = {مدلسازی هاب انرژی برای تامین نیازهای آب، حرارت و برق یک کارخانه سیمان}, abstract_fa = {در این مقاله از مفهوم هاب انرژی برای تأمین نیاز به برق ، گرمایش و آب یک کارخانه سیمان در جنوب ایران استفاده شده است. با توجه به پتانسیل بالای کارخانه سیمان برای بازیابی حرارت اتلافی، دو سناریو با استفاده از آنالیز انرژی ، اگزرژی ، اقتصادی و زیست محیطی برای هاب انرژی در نظر گرفته شده است . سناریو ۱: با در نظر گرفتن تقاضاهای هاب انرژی و خرید / فروش حامل های انرژی از جمله برق ، گرمایش ، آب شیرین و همچنین تولید آن با استفاده از توربین گازی ، توربین بخار ، آب شیرین کن چند کارهMED و سیستم اسمز معکوس RO سناریو ۲ : برآورده کردن نیازهای هاب بر اساس سناریو ۱ و بازیابی گرمای اتلافی از کارخانه سیمان. با مقایسه دو سیستم تأمین انرژی ، مطالعه موردی فعلی و بهینه سازی انرژی، نتایج نشان داد که کل هزینه سالانهTAC در حدود ۳۷۰۰۰ دلار در سال کاهش یافته و راندمان اگزرژی ۳۶٪ افزایش یافته است. نتایج نشان می دهد که پس از بهینه سازی ، میانگین TAC هنگام بازیابی حرارت اتلافی، ۲۷٪ شرایطی است که گرمای اتلافی نادیده گرفته می شود.}, keywords_fa = {هاب انرژی,هزینه سالانه کل,الگوریتم ژنتیک}, url = {https://www.jsat.ir/article_108514.html}, eprint = {https://www.jsat.ir/article_108514_fc5cf9815fde5d27af981e8ffe609dfb.pdf} }